Our Range
All Dixon-Lesley cutters offer the following benefits:
- Accuracy to within 0.5mm
- Low spindle power
- Low swarf
- User-regrindable, replaceable tips
- Extended life at moderate cost
- For plate up to 10mm thick
- Diameters from 16mm to 300mm
- For plate up to 90mm thick
- Diameters from 40mm to 300mm
- For cutting into tubes, vessels or irregular surfaces
- Hole diameters up to 300mm
- Single pass solution to difficult problems
- Off-axis and oblique boring
- Single pass through boring of hollow sections and fabrications
- Through hole alignment assured
- Special tools for cutting into pressurised live gas or fluid pipes
- A tapping tool is available to cut and thread up to 200mm diameter in one pass
- Cutters supplied for well-head and down-hole applications
- Coupon capture systems available
- Groove diameter up to 300mm
- Groove width up to 11mm in one pass
Maughan Technical Services
Coach House : The Green : Wallsend : Tyne & Wear : NE28 7PG : UK
Phone: +44 (0) 191 262 5613 Fax: +44 (0) 191 295 0046
